64 m1s series 5.0 volt hcmos/ttl compatible ceramic package surface mount oscillators features grounded lid for reduced emi. this product is available in both 5.0 v (m1s) and 3.3 v (m2s). m1s series 5.0 volt hcmos/ttl compatibleoscillators 1 ttl load - see load circuit diagram #1 on page 137. hcmos load - see load circuit diagram #2 on page 137. 2 symmetry is measured at 1.4 v with ttl load and at 50% vdd with hcmos load. 3 rise/fall times are measured between 0.5 v and 2.4 v with ttl load, and between 10% vdd and 90% vdd with hcmos load. see page 136, figure ?2? for suggested solder profile. recommendation: unless board height (.185 vs. .140) is a concern, m-tron recommends the m7s series. see page 79. tri-state control logic pin 1 high or floating: clock signal output. pin 1 low: output disabled to high impedance. pin connections a = available n = not available s = standard c = consult factory available stabilities vs. temperature electrical specifications
|